The whole building, in one platform.
Meters, heat control, alerts, sensors and cameras: one platform for building operators.
Metbox platform
4207kWh
01 Meter reading
Water, heat, electricity, gas and allocators: tenant and building meters, wireless or wired.
- Wireless M-Bus, LoRaWAN, NB-IoT
- M-Bus and Modbus on cable
- Same reading date for every meter
02 Central heat control
Heating controller on the platform: curve, night setback and DHW from your browser.
- Heat curve, setback and hot water
- Weather forecast compensation
- Every change logged with who made it
03 Monitoring & alerts
Leaks, heating faults, cold rooms, offline devices: alerts before residents call.
- Leak, burst and damp alarms
- Heating faults and cold rooms
- Email or SMS to on-duty staff
04 Service tracking
Your crews tagged and tracked: who was in the building, when, and what they did.
- Bluetooth tags check crews in and out
- Tasks assigned and signed off in the app
- Photos and acts kept with the building
05 Energy data
Consumption by building, year and m²: ready for ISO 50001 or energy certificates.
- Heat, water, electricity and gas per m²
- ISO 50001 evidence
- Baselines for certificates and renovation
01 · Meter reading
Every meter in the building, read on the same day
Water, heat, electricity, gas and allocators: wireless and wired: one file on the date you set.
See the meters we read
ADD GrupADR
ApatorUltrimis Neo
Landis+GyrT550 ULTRAHEAT- ApatorELF
ABBB23
ActarisACE2000 type 290- EngelmannHCA-E2
- QundisQ Caloric
Models from the platform's own device list, not a brochure.
02 · Central heat control
Heat set from a browser, not from the boiler room
Controller on the platform: flow and return, curve, setback, DHW: weather-adjusted, every change logged.
How heat control worksMetbox platform
03 · Monitoring & alerts
You call the resident, not the other way round
Leaks, cold rooms, silent meters, offline gateways: email or SMS to on-duty staff while it's still a small job.
See the platformAlerts
Live
- Leak in the basement, riser B2 min agoSMS
- Unit 34 is cold, 17.4 °C18 min agoEmail
- Heat meter silent for 3 days1 h agoApp
- Gateway offline, Liepājas 143 h agoEmail
04 · Service tracking
Every visit and every job on record
Bluetooth tags stamp arrival and departure; tasks, photos and acts stay with the building.
Ask about tags and the appVisits and jobs
Caretaker
09:12 - 09:48
Riser B valve changed, photo attached
Plumber
11:05 - 12:20
Leak sensor replaced in the basement
Meter reader
14:30 - 14:52
Two allocators re-registered
- Bluetooth tag
- Service app
05 · Energy data
The year's energy, ready for an auditor
Heat, electricity, water and gas per building and m²: for ISO 50001, certificates or owner reports.
Energy managementEnergy, last 12 months
512 MWh
Heat, last year
128 kWh/m²
Per square metre
- ISO 50001
- Energy certificate
- Billing export
From building meter to clear operational view
One secure path from apartment and building meters to the systems your teams already use - for monitoring, reporting, billing exports and resident communication.
- 1
Send building info
Share your meter and building information so the right setup can be prepared for your portfolio.
- 2
Tailored offer
Get a tailored Metbox offer matched to your meters, buildings and the way your team works.
- 3
Install gateways
Metbox gateways are installed and begin reading compatible meters across your buildings.
- 4
Use the data
Start using consumption, alerts and billing-ready data in the Metbox Platform.
Built for the way buildings are actually managed
Fewer missed readings, fewer manual interventions and a clearer view of every building across apartments, staircases, technical rooms and whole-portfolio meters.
Readings without chasing residents
Manual reading depends on access, reminders, handwritten values and repeated corrections. Metbox reads compatible meters remotely through its gateways - data lands in the platform, ready for review, reporting and billing.
- No reminders, visits or handwritten values
- Every meter read on the same day of the month
- Automated remote reading from compatible meters
A better view of every building
Buildings show problems long before a complaint is filed. Metbox surfaces unusual consumption, missing readings, possible leaks and meter points needing attention - so teams act early, not only after invoices or damage.
- Spot unusual consumption and possible leaks
- Missing-reading and communication alerts
- Identify where action is needed earlier
Billing data that is easier to prepare
Clean data makes billing simple. Metbox structures readings by building, staircase, apartment and accounting point, then exports them to your billing, accounting and management systems - cutting manual work and corrections.
- Readings structured by building & apartment
- Validated historical data per accounting point
- REST API and CSV/XLSX for billing exports
What property managers gain with Metbox
Calmer operations
Less chasing, fewer surprises
- Reliable remote readings across the portfolio
- No chasing residents for monthly values
- Fewer missed readings and manual corrections
- Early warning on leaks and irregular consumption
- Billing-ready consumption data
- Better communication with residents
Data you can act on
Structured, validated, integration-ready
- Centralised meter data across buildings
- One record per unit, entrance and building
- Consumption & gateway communication status
- Validated historical data & trends
- CSV/XLSX exports & REST API integration
- Role-based access and auditability
- Data prepared for billing and decision-making
What you need to bring buildings online
GatewayMetbox Pro
Mains-powered wM-Bus gateway for continuous, high-frequency reading in buildings and technical rooms.
GatewayMetbox Pro DIN
Battery-powered wM-Bus gateway for buildings and meter points without convenient mains power.
Ready for clearer building data?
Talk to the Metbox team about your buildings, meters and connected equipment - and see how fast reliable remote reading, monitoring and billing-ready data can be up and running across your portfolio.