One platform for all your meter data

Readings arrive over wireless M-Bus, LoRaWAN and NB-IoT and land in the same place: charts, alerts, a map, reports, heating control and the paperwork that follows them.

Request a demo

Wireless M-Bus from 100+ meter models

Every manufacturer packs the frame its own way. The drivers are written, so a reading is a reading: volume, energy, flow, temperatures, error flags and the meter’s own timestamp, named the same across every model.

  • 100+ models, T, C and S modes
  • Encrypted frames handled, keys held per meter
  • New model? Send us a frame and we write the driver

LoRaWAN from 100+ models

One gateway covers a district. Devices join it, payloads are decoded per model, and the radio behind each reading is kept with it: spreading factor, RSSI, SNR, frame counter: so a meter drifting out of range shows up before it goes quiet.

  • OTAA and ABP, keys and profiles per device
  • Payload decoders for 100+ models
  • Radio quality stored with every reading

NB-IoT from 20 meter models

Where there is no room for a gateway, the meter carries its own SIM and reports over the mobile network. The platform takes the data in, keeps signal strength and battery beside it, and tells you when a device has stopped calling home.

  • 20 models supported, more on request
  • Signal and battery tracked per device
  • Nothing to mount in the building

Meter stock management

Meters are registered when they arrive, not when they are mounted. Serial ranges, keys, batches and where each box went: so the installer scans one and the platform already knows what it is and whose it is.

  • Batches and serial ranges: in stock or issued
  • Keys loaded before dispatch
  • Full history: received, issued, installed, returned

Gateway management and LoRaWAN network server

The network server is part of the platform, not a subscription somewhere else. Gateways report uptime, throughput and the packets passing through them, and you can see which one picked up a given reading.

  • Built-in LoRaWAN network server
  • Uptime, throughput and packet log per gateway
  • Remote configuration and firmware updates

Meter data analysis and charts

Pick a period and see it: hourly consumption, daily totals, several meters on the same axis, last year laid over this one. Zoom into an hour or step back to a year without exporting anything.

  • Hour, day, month, year: any period
  • Several meters or buildings on one chart
  • The same numbers out to CSV or XLSX

Alerts

The platform watches every meter it reads. Consumption that never stops overnight, three times the usual, a meter gone quiet, a tamper or error flag from the device itself: each alert arrives with the reading that raised it.

  • Leak, no-data, tamper and error rules
  • Thresholds per meter or per group
  • Email, in the platform, or into your own system

GIS and map

Every device sits on the map with its address and coordinates. Filter by network, status or type, click a pin for the last reading, and hand a technician a list already in the order the street runs.

  • Meters, gateways and sites on one map
  • Filter by network, status or alert
  • Coordinates in and out, with your own layers

Building 3D floorplans and room heat control

Load the floorplans and every room shows what it measures and what it was asked to hold. Set a room, a floor or the whole building, and see which rooms never reach their target and which are heating an open window.

  • Floor by floor, room by room
  • Measured and setpoint side by side
  • Schedules per room, with holiday setback

District heating control and SCADA

The substation as it is plumbed: supply and return, the exchanger, pumps and the valve. Read the sensors, follow the heat curve, move a setpoint and watch the trend answer: with every change logged against the person who made it.

  • Substation schematics with live values
  • Heat curve, setpoints and schedules
  • Modbus RTU and TCP, every change logged

Reports

Readings for a period, per building, per customer or per meter, with the gaps filled the way you agreed to fill them. Set it up once and it runs itself every month, into an inbox or straight into the system that invoices from it.

  • Billing, consumption and technical reports
  • Scheduled monthly, by email or API
  • CSV, XLSX and PDF

Energy management

Consumption normalised per area and per degree day, so buildings can be compared honestly and a saving can be told apart from a mild winter. Targets per site, and the evidence trail an ISO 50001 audit asks for.

  • kWh/m², degree-day correction, baselines
  • Targets and savings per building
  • ISO 50001 and energy certificate data

Device service, visits and calendar

Work is booked in a calendar and lands on a technician’s list. Each visit carries the device, the address and what was done last time, and closes with a note, a photograph and a reading: so a meter’s history is in one place five years later.

  • Calendar per technician, jobs per site
  • Full service history per device
  • Verification and replacement due dates

User levels and permissions

Accounts are scoped to the sites they are responsible for: a caretaker sees their building, a manager the portfolio, a partner their own customers. Control, export and settings are separate rights from reading.

  • Roles, groups and per-site scope
  • Read, export and control as separate rights
  • Every change in an audit log, GDPR-ready

Security: 2FA, SSL, VPN

Two-factor sign-in, TLS on every connection, meter keys held encrypted, and VPN or fixed-IP links where the network demands them. Hosted in the EU, backed up daily, with a record of who did what.

  • Two-factor authentication and SSO
  • TLS everywhere, encrypted keys and backups
  • VPN and APN links, EU hosting

See it with your own meters

Book a demo and we will walk through the platform on a network like yours, then read your first meter on a trial account.

Request a demoSee supported meters