KamstrupMULTICAL 403Remote reading over Wireless M-Bus, M-Bus, Modbus
Heat · serial, Wireless M-Bus, M-Bus, Modbus
Connection options
serial
Integrated
No gateway needed. Readings are entered by hand or imported from a file.
Metbox platform
Metbox platform
4207kWh
Readings
- Total MWh
- Volume m³
- Supply and return temperature
Alerts
- Meter fault code
- No data received
How to read Kamstrup MULTICAL 403 remotely
Every route below is one we have tested and integrated. Pick the one that matches the network on your site.
Tested by Metbox: this model is in our device database, and our team has integrated and decoded it.
- Wireless M-Bus
- The meter broadcasts its readings by radio at 868 MHz. A Metbox Wireless M-Bus gateway in range receives the telegrams; if they are encrypted, add the meter’s AES key in the platform once, and every reading arrives decoded. Wireless M-Bus gateway
- M-Bus
- Connect the meter to the two-wire M-Bus of a Metbox Pro. The gateway polls it by its primary or secondary address and sends each reading on over 4G/LTE. M-Bus gateway
- Modbus
- Wire the device to the RS-485 port of a Metbox Pro. It is polled by address, and its registers are read by name rather than by number. Modbus reading
Once connected, its readings are in the Metbox platform: dashboards, alerts, reports, exports and the REST API. Remote meter reading platform