DiehlSharky 775Remote reading over Wireless M-Bus, M-Bus, Serial
Heat · M-Bus, Wireless M-Bus, Meter data API, serial, Serial
Connection options
Meter data API
Integrated
- Platform integration, no hardwareConnect
serial
Integrated
No gateway needed. Readings are entered by hand or imported from a file.
Metbox platform
Metbox platform
4207kWh
Readings
- Total MWh
- Volume m³
- Supply and return temperature
Alerts
- Meter fault code
- No data received
How to read Diehl Sharky 775 remotely
Every route below is one we have tested and integrated. Pick the one that matches the network on your site.
Tested by Metbox: this model is in our device database, and our team has integrated and decoded it.
- Wireless M-Bus
- The meter broadcasts its readings by radio at 868 MHz. A Metbox Wireless M-Bus gateway in range receives the telegrams; if they are encrypted, add the meter’s AES key in the platform once, and every reading arrives decoded. Wireless M-Bus gateway
- M-Bus
- Connect the meter to the two-wire M-Bus of a Metbox Pro. The gateway polls it by its primary or secondary address and sends each reading on over 4G/LTE. M-Bus gateway
- Serial
- Connect the device to the serial port of a Metbox Pro, which polls it and sends each reading on over 4G/LTE.
- Meter data API
- The readings arrive through the platform’s data API, pushed by the system that already collects them. Nothing to install on site.
Once connected, its readings are in the Metbox platform: dashboards, alerts, reports, exports and the REST API. Remote meter reading platform