BMETERSHydrodigit S1Remote reading over Wireless M-Bus
Water · Wireless M-Bus, Manual reading
Connection options
Manual reading
Integrated
No gateway needed. Readings are entered by hand or imported from a file.
Metbox platform
Metbox platform
1386m³
Readings
- Total m³
- Daily and hourly consumption
- Flow rate
Alerts
- Leak and continuous flow
- No data received
How to read BMETERS Hydrodigit S1 remotely
Every route below is one we have tested and integrated. Pick the one that matches the network on your site.
Tested by Metbox: this model is in our device database, and our team has integrated and decoded it.
- Wireless M-Bus
- The meter broadcasts its readings by radio at 868 MHz. A Metbox Wireless M-Bus gateway in range receives the telegrams; if they are encrypted, add the meter’s AES key in the platform once, and every reading arrives decoded. Wireless M-Bus gateway
- Manual reading
- Readings are entered by hand or imported from a file, and sit beside every automatic reading in the platform.
Once connected, its readings are in the Metbox platform: dashboards, alerts, reports, exports and the REST API. Remote meter reading platform
